59.a0Color LaserJet Pro MFP M183fw

HP Color LaserJet Pro MFP M183fw error 59.a0: Quick Fix

The HP Color LaserJet Pro MFP M183fw error 59.a0 occurs when the engine controller detects a failure in the main motor's rotation. This error forces the machine to stop to prevent further internal damage. Most users can resolve this by performing a power cycle or clearing internal paper debris.

1 views

Common causes

  • 1Physical obstruction of the drive train due to paper scraps.
  • 2Mechanical gear wear caused by heavy usage.
  • 3Voltage fluctuations affecting motor control sensors.
  • 4Dust buildup inside the motor housing.

Solutions

Quick Diagnosis

If your printer stops with the 59.a0 code, check for obstructions near the drum or toner cartridges. A quick visual inspection can rule out paper jams that stop the motor from turning.

Step-by-step Solution

  1. Hard Power Off: Unplug the power cable while the printer is currently powered on.
  2. Power Cycle: Wait 60 seconds to allow internal capacitors to discharge.
  3. Reconnect: Connect the power cable directly to a wall outlet and turn it on.
  4. Test Print: Send a test document to confirm the motor is working correctly.

Prevention and Maintenance

Keep the printer away from dusty environments and use a reliable power source to prevent voltage spikes. Use original toner cartridges to maintain proper gear alignment. Regular dusting of the internal cavity will extend motor life.

When to Call a Technician

If the error persists after a hard reboot or you hear grinding noises from inside the unit, a mechanical part may have failed and requires professional repair.

Technical Specifications

  • Technology: Color Laser MFP
  • Speed: Up to 17 ppm
  • Connectivity: Wi-Fi, USB 2.0, Ethernet
  • Input Capacity: 150 sheets
  • Compatible Toner: HP 215A series (W2310A/11A/12A/13A)
  • Recommended Use: Small Office / Home
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Hard Power Off

    Unplug the power cable while the printer is currently powered on.

  2. 2

    Power Cycle

    Wait 60 seconds to allow internal capacitors to discharge.

  3. 3

    Reconnect

    Connect the power cable directly to a wall outlet and turn it on.

Frequently asked questions

This error occurs when the main motor detects a mechanical jam or electrical overload preventing normal rotation.

It is a medium-level failure. If it persists after a reset, it may indicate physical wear on the internal gears.

It uses the HP 215A series (W2310A, W2311A, W2312A, W2313A).

Clean the rollers every 5,000 pages and avoid overloading the paper tray.