59.06.00PageWide XL 4200

HP PageWide XL 4200 Error 59.06.00: Troubleshooting Guide

The HP PageWide XL 4200 error 59.06.00 typically occurs when the printer's motor control system detects a mechanical obstruction. This issue stops the print head or rollers, halting production. Why is my HP PageWide XL 4200 showing error 59.06.00? It is commonly caused by paper debris stuck in the material path.

1 views

Common causes

  • 1Physical obstruction due to paper scraps in the paper path.
  • 2Wear and tear in the main motor drive gears.
  • 3Failure in motor position sensor communication.
  • 4Dust accumulation in the drive motor shaft.

Solutions

Diagnóstico rápido

The error triggers a screen notification and stops the motor instantly. Listen for a repetitive clicking sound, which usually signifies a gear jam.

Solución paso a paso

  1. Hard Reset: Power off the unit using the main switch and unplug the power cord for at least 60 seconds.
  2. Check for Debris: Open the top cover and check for paper scraps or debris blocking the rollers.
  3. Restart System: Close all covers and reconnect the power to trigger a system self-calibration.

Prevención y mantenimiento

Clean rollers with a lint-free cloth and 90% isopropyl alcohol. Avoid dust buildup. Use original ink cartridges to extend the lifespan of the nozzles.

Cuándo llamar a un técnico

If the error persists after cleaning, there may be internal motor damage requiring professional service.

Ficha técnica del equipo

  • Technology: PageWide (Thermal inkjet)
  • Performance: Up to 10 D/A1 prints per minute
  • Connectivity: Gigabit Ethernet, USB 3.0
  • Consumables: HP 841/842 ink cartridges
  • Application: High-volume technical printing
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Hard Reset

    Power off the unit using the main switch and unplug the power cord for at least 60 seconds.

  2. 2

    Check for Debris

    Open the top cover and check for paper scraps or debris blocking the rollers.

  3. 3

    Restart System

    Close all covers and reconnect the power to trigger a system self-calibration.

Frequently asked questions

This code indicates the motor control system has detected an abnormal resistance in the drive train.

It is a functional error that stops printing, but it is often resolved by clearing physical obstructions.

It uses high-capacity pigmented inks from the PageWide XL 841/842 series.

Roller cleaning is recommended every 50,000 prints or monthly in dusty environments.