59.0070LaserJet Managed MFP E52645dn

HP LaserJet Managed MFP E52645dn 59.0070 Error Fix

The HP LaserJet Managed MFP E52645dn error 59.0070 refers to a communication error with the feed motor of the trays. This motor is responsible for rotating the mechanisms that elevate and move the paper inside the equipment. A failure here blocks the automatic loading capacity.

1 views

Common causes

  • 1Physical obstruction preventing the tray motor rotation.
  • 2Electrical feed motor failure.
  • 3Wear of the coupling gears between the tray and the printer.
  • 4Excessive dirt on the tray presence sensors.

Solutions

Diagnóstico rápido

If the printer makes unusual noises at the bottom before displaying the error when you try to print, the problem is mechanical in the feed base.

Solución paso a paso

  1. Tray inspection: Remove the tray and check if there are paper scraps stuck at the back.
  2. Reset: Power off, disconnect, and clean the tray presence sensor with compressed air.
  3. Loading: Reinsert the tray, perfectly adjusting the paper guides.
  4. Test: Power on and request a test page.

Prevención y mantenimiento

Do not slam the trays when inserting them, as this can misalign the coupling gears with the motor. Always keep paper levels within the guides.

Cuándo llamar a un técnico

If the error reappears upon trying to print after confirming there are no physical obstructions, the rotation motor is faulty.

Ficha técnica del equipo

Frequently asked questions

This code indicates a failure in the rotation or feed motor. The unit cannot start the rotation needed for paper pickup.

A full power cycle is usually the first step, followed by checking for tray jams.

Uses original HP 89A/X to keep the rotation mechanism under ideal conditions.

If the issue is only an obstruction, yes. If the motor fails permanently, a technician is needed.