59.00.00Color LaserJet Pro M454dw

HP Color LaserJet Pro M454dw error 59.00.00: Motor failure

The HP Color LaserJet Pro M454dw error 59.00.00 is a technical notification of a failure in the cartridge drive motor or the fuser motor. This code appears when the system electronics do not detect expected rotation, usually due to a mechanical obstruction or a faulty electrical component.

1 views

Common causes

  • 1Cartridge drive motor failure.
  • 2Mechanical fuser unit obstruction.
  • 3Internal gear breakage.
  • 4Motor rotation sensor disconnection.

Solutions

Quick Diagnosis

If you hear a metallic or grinding noise when starting the printer, the issue is likely a broken gear set in the main drive motor.

Step-by-Step Solution

  1. Power Off: Completely disconnect the printer.
  2. Inspection: Remove the four toner cartridges and check for any physical obstructions in the roller drive mechanism.
  3. Test: Reinsert the cartridges, ensuring each is fully seated.
  4. Start: Power on and see if the initialization cycle completes.

Prevention and Maintenance

Avoid low-quality compatible toners whose gears lack precision, as they strain the main motor. Keep the inner print area free of loose toner and dust.

When to call a technician

If inspection does not resolve the 59.00.00 error, professional repair is needed to replace the motor assembly or drive gear unit.

Device technical specifications

  • Technology: Color Laser
  • Speed: Up to 28 ppm
  • Connectivity: Wi-Fi, Ethernet
  • Feeding capacity: 250 sheets
  • Compatible media: HP 415A / 415X
  • Usage: Medium-volume office
  • Official drivers / firmware

Frequently asked questions

Error 59.00.00 means there is a problem with the main motor, responsible for rotating the toner cartridges or the fuser.

Yes, turn off the printer, wait a few minutes, and turn it back on; this can sometimes clear a mechanical jam preventing motor rotation.

Use genuine HP 415 series cartridges to prevent the rotation mechanism from binding due to poor toner distribution.

If you hear metallic noises after rebooting or the error returns, the motor might have broken gears.