586C310dn

OKI C310dn Error 586: Toner Level Issues

The OKI C310dn error 586 alerts users to low or improperly detected toner levels. This can happen due to misread chips or debris covering sensors. Knowing how to troubleshoot the OKI C310dn error 586 ensures you don't replace perfectly good consumables.

1 views

Common causes

  • 1Empty toner level
  • 2Corrupted chip reading
  • 3Obstruction on sensor
  • 4Internal fault in printer logic

Solutions

Quick Diagnosis

If the error code appears and the cartridge still feels full, the printer sensor likely has an issue with the cartridge chip.

Step-by-step Solution

  1. Open the printer cover.
  2. Remove the toner cartridge.
  3. Gently shake the cartridge to refresh the toner level.
  4. Reseat firmly.

Prevention and Maintenance

Use original supplies for consistent toner level readings. Clean the scanner and internal sensors periodically.

When to call a technician

If error 586 persists after replacing the cartridge, the sensor unit might require professional inspection.

Technical Data

  • Technology: LED Printer
  • Speed: 22 ppm
  • Connectivity: USB, LAN
  • Capacity: 250 sheets
  • Consumables: C310 Series Toner
  • Recommended Use: Home office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open access

    Open top cover to view toners.

  2. 2

    Inspect

    Verify if the cartridge is truly empty.

  3. 3

    Reinstall

    Reseat the cartridge firmly.

Frequently asked questions

It signals a low toner level or a failure to read the toner cartridge chip.

Gently shake the toner cartridge and reinstall it to ensure a clean connection.

Original cartridges provide the most reliable chip communication.

Only if multiple verified cartridges fail to clear the error.