580MC363dn

Fix OKI MC363dn Error 580: Tray Feeding Issues

Error 580 on the OKI MC363dn indicates a feed failure from the tray. This often involves paper alignment issues or dust obstructing the paper-presence sensor. Resolving this quickly restores your printing capabilities.

1 views

Common causes

  • 1Misaligned or warped paper in the tray.
  • 2Sensors obscured by paper dust.
  • 3Tray improperly seated in the printer housing.

Solutions

Tray Check

  1. Fully pull out the paper tray.
  2. Ensure paper is squared and not curled.
  3. Adjust side guides to match the paper width.

Sensor Cleaning

  1. Remove paper and check for debris.
  2. Use compressed air to clean sensor area.
  3. Reinsert tray securely.

Steps to follow

  1. 1

    Remove Tray

    Slide the paper tray out from the printer.

  2. 2

    Check Debris

    Check for small paper pieces near the feed rollers.

  3. 3

    Seat Tray

    Reinsert the tray and ensure it locks into place.

Frequently asked questions

No, do not use force as it can damage the plastic rails and sensors.

Yes, if the tray is correctly seated and the error remains, the sensor may be faulty.

Absolutely, damp paper sticks and causes misfeeds triggering this error.