580c712dn

OKI c712dn error 580: Toner Sensor Issue

OKI c712dn error 580 indicates a potential sensor error regarding toner detection. This issue usually requires inspecting the toner cartridge seating and sensor condition.

1 views

Common causes

  • 1Toner density sensor blockage.
  • 2Loose toner cartridge.
  • 3Dirty LED sensors.
  • 4Firmware mismatch.

Solutions

Diagnóstico rápido

The 580 error prevents printing. Ensure all toner cartridges are seated correctly to rule out simple misalignment.

Solución paso a paso

  1. Open front cover.
  2. Remove the indicated cartridge.
  3. Check sensor area for debris.
  4. Reinstall cartridge.

Prevención y mantenimiento

Keep the printer interior dust-free. Clean sensor glass with a lint-free cloth periodically.

Cuándo llamar a un técnico

If the error continues, the internal sensor board might need inspection by a service engineer.

Ficha técnica del equipo

  • Technology: Digital LED
  • Speed: 36 ppm
  • Connectivity: Ethernet, USB
  • Consumable: C712 Series toner
  • Use case: Office print jobs
  • Support

Steps to follow

  1. 1

    Open cover

    Open front panel.

  2. 2

    Check

    Verify cartridge seating.

  3. 3

    Clean

    Wipe the sensor area.

Frequently asked questions

It indicates a sensor communication issue, likely caused by toner detection problems.

Printing is suspended to protect the image drum.

Original OKI high-capacity toner is recommended.

Clean the LED bars and keep the area free of dust.