580C110

OKI C110 Error 580: Drum Unit Failure

OKI C110 error 580 is an alert regarding the imaging drum or the development unit. This error occurs when the printer fails to detect normal rotation of the drum or senses a blockage, pausing operations to prevent hardware damage. Solving OKI C110 error 580 usually requires inspecting the drum assembly for obstructions or connectivity issues.

1 views

Common causes

  • 1Physical jam: Paper debris hindering rotation.
  • 2Mechanical wear: Worn out gear assembly in the drum.
  • 3Connection issue: Dirty contact terminals.
  • 4End-of-life: Drum has reached maximum page count.

Solutions

Diagnóstico rápido

Error 580 appears when the drum assembly fails to initialize or spin during the pre-print sequence.

Solución paso a paso

  1. Power off the printer.
  2. Open the top cover and pull out the drum cartridge.
  3. Visually check for any paper scraps stuck near the drum cylinder.
  4. Wipe contact points on the drum unit gently.
  5. Firmly reinsert the drum assembly.

Prevención y mantenimiento

Never touch the surface of the green/blue drum cylinder. Keep the printer away from dusty environments. Use genuine OKI supplies for consistent mechanical performance.

Cuándo llamar a un técnico

If the error 580 remains after reseating the drum, the internal drum gears have likely failed, requiring a replacement part.

Ficha técnica del equipo

  • Technology: LED Laser Printer
  • Speed/performance: 5 ppm (color) / 20 ppm (mono)
  • Connectivity: USB 2.0
  • Tray capacity: 200 sheets
  • Compatible consumable: OKI C110 series
  • Recommended use: Home/Small Office
  • Drivers / official firmware

Steps to follow

  1. 1

    Access drum

    Open top cover and carefully pull out the drum.

  2. 2

    Inspect unit

    Check for paper debris on the roller assembly.

  3. 3

    Reinstall

    Slide the drum back until it clicks into place.

Frequently asked questions

The printer is reporting a rotational or communication error with the drum.

No, do not touch the light-sensitive cylinder; it will damage the surface.

Uses C110 series toner; keep consumables clean to prevent sensor errors.

Avoid direct sunlight and keep the printer clean.

OKI C110 Error 580: Drum Unit Failure | Vimazdev