550B930dn

OKI B930dn error 550: Quick Technical Fix

The OKI B930dn error 550 is an alert triggered by a failure in the main paper tray input system. It occurs when the paper sensor remains empty or the feed rollers fail to initiate the sheet movement, causing a disruption in workflow. Mastering how to fix OKI B930dn error 550 ensures steady performance for large document tasks.

2 views

Common causes

  • 1Tray not fully seated in the printer.
  • 2Dirty or hardened feed rollers.
  • 3Paper sensor blocked by dust or debris.
  • 4Poor paper quality or incorrect weight.

Solutions

Quick Diagnosis

If you see this error, check if the tray is properly pushed in. The OKI B930dn error 550 often stems from worn-out feed rollers that cannot pull the top sheet reliably.

Step-by-Step Solution

  1. Pull out the paper tray to examine its contents.
  2. Clear any stray paper scraps in the input path.
  3. Wipe the feed rollers with a soft, damp cloth to remove any accumulated dust.
  4. Reload clean, dry paper and ensure the guides are snug against the stack.

Prevention and Maintenance

Always fan the paper ream before loading to prevent static adhesion. Regularly clean rollers every 10k impressions. Stick to original B930 toner to minimize internal debris.

When to Call a Technician

If the rollers are clean and the tray is fully seated but the error remains, the tray sensor or the pick-up motor may require professional repair.

Device Technical Data

  • Technology: Monochrome Laser Printer.
  • Speed: Up to 50 ppm.
  • Connectivity: Gigabit Ethernet, USB 2.0.
  • Capacity: Up to 2,600 sheets with extensions.
  • Consumable: B930 toner series.
  • Use: High-demand corporate workgroups.
  • Support Center

Steps to follow

  1. 1

    Check paper

    Remove the paper tray and ensure the paper stack is not overfilled or misaligned.

  2. 2

    Clean rollers

    Use a damp cloth to clean the rubber feed rollers to improve grip.

  3. 3

    Reinsert tray

    Slide the tray back in until it clicks into place.

Frequently asked questions

This error means the sensor cannot detect paper in the tray or the feeder failed to pick up a sheet.

Bypassing is usually not possible as it relates to a physical paper feed failure.

It uses the B930 high-yield toner series. Genuine parts are highly recommended.

Always fan your paper before loading and ensure it matches the printer's weight requirements.

OKI B930dn error 550: Quick Technical Fix | Vimazdev