52.xxLaserJet Tank 1005w

Fixing HP LaserJet Tank 1005w Error 52.xx: Laser Scanner Fail

The HP LaserJet Tank 1005w error 52.xx points to a malfunction in the laser scanner motor. This component is essential for timing the laser pulses correctly; when it fails to spin at the required speed, the print process is aborted. Why does my HP LaserJet Tank 1005w show error 52.xx? The primary cause is often a failing motor assembly or fluctuating power supply to the laser control board.

2 views

Common causes

  • 1Defective laser scanner motor assembly.
  • 2Unstable voltage from the power board.
  • 3Dirty scanner optics causing signal loss.
  • 4Worn-out mechanical bearings within the laser motor unit.

Solutions

Quick Diagnosis

If you see error 52.xx, check if there is a whining noise during startup. If the printer attempts to initialize but stops immediately with this error, the motor is likely struggling to reach calibration speed.

Step-by-Step Solution

  1. Extended Power Off: Unplug for 10+ minutes.
  2. Check Wall Outlet: Ensure no power strips are interfering.
  3. Firmware Check: Use HP Smart to verify if a firmware update is available.
  4. Restart: Re-initialize the print cycle.

Prevention and Maintenance

Keep the printer in a cool, dust-free environment. Ensure it is connected to a stable power source to avoid electrical damage to the laser assembly's high-speed motor.

When to Call a Technician

If the error 52.xx code remains constant after troubleshooting, the laser scanner assembly is likely defective and requires replacement.

Technical Specifications

  • Technology: Laser Monochrome
  • Speed: 23 ppm
  • Connectivity: USB 2.0 and Wi-Fi
  • Feeding Capacity: 150 sheets
  • Consumables: 154A Toner Refill Kit
  • Recommended Use: Home Office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power Cycle

    Unplug the printer and leave it off for 10 minutes to allow the laser motor to cool down.

  2. 2

    Direct Power Connection

    Plug the power cable directly into a wall outlet to rule out surge protection issues.

  3. 3

    Restart

    Turn the printer back on. If the error persists, physical hardware damage is likely.

Frequently asked questions

This code means the laser scanner motor cannot reach the correct rotation speed required to write the image.

Sometimes a power cycle helps, but 52.xx usually relates to physical motor wear that requires professional technician intervention.

This model uses the 154A toner refill kit. Follow the specific loading instructions to prevent internal errors.

Avoid dust accumulation around the printer, as the laser assembly is precision-calibrated and sensitive to particles.