52.00.00LaserJet Pro M501dn

HP LaserJet Pro M501dn error 52.00.00: Scanner Motor Fix

The HP LaserJet Pro M501dn error 52.00.00 is a scanner motor fault. It indicates that the laser scanner unit (LSU) is failing to reach the necessary rotational speed, forcing the system to shut down to prevent printing errors. This internal unit is highly precise and requires a stable power supply.

1 views

Common causes

  • 1LSU motor failure: Laser polygon doesn't rotate properly.
  • 2Controller board issue: Logic board failing to regulate laser speed.
  • 3Loose cabling: Vibrations causing internal connections to fail.
  • 4Power irregularities: Voltage drops affecting motor current.

Solutions

Diagnóstico rápido

If you hear an unusual clicking or winding noise upon startup followed by the 52.00.00 code, the LSU motor is failing to initialize correctly.

Solución paso a paso

  1. Shut down the printer and unplug for 15 minutes.
  2. Plug the printer directly into a wall outlet to rule out power issues.
  3. Turn the printer on to re-initialize the laser motor.
  4. If the error continues, professional internal component service is required.

Prevención y mantenimiento

Keep the printer in a clean environment to avoid dust buildup in the laser optics. Always use a surge protector or stable power source to protect the delicate motor circuitry.

Cuándo llamar a un técnico

The 52.00.00 error usually necessitates the replacement of the entire Laser Scanner Unit. If the hardware is unresponsive to a hard reset, professional repair is needed.

Ficha técnica del equipo

  • Technology: Monochrome Laser.
  • Speed: 45 ppm.
  • Connectivity: USB 2.0, Ethernet, Wi-Fi Direct.
  • Capacity: 650 sheets.
  • Consumables: HP 87A / 87X Toner.
  • Recommended Use: Corporate office.
  • Official Drivers / Firmware
HP LaserJet Pro M501dn error 52.00.00: Scanner Motor Fix | Vimazdev