5200PIXMA TS202

Canon PIXMA TS202 error 5200: Troubleshooting Guide

The Canon PIXMA TS202 error 5200 indicates a thermal overheating issue with the printhead. This is common when ink levels are low or when there is a connection failure with the cartridges. For this compact inkjet model, this error is a safety mechanism to prevent damage. The fix involves checking the ink supply and verifying contact points.

1 views

Common causes

  • 1Empty ink causing printhead dry-out.
  • 2Bad connection between cartridge and carriage.
  • 3Printhead thermal sensor malfunction.
  • 4Minor mechanical carriage obstruction.

Solutions

Diagnóstico rápido

The error 5200 manifests as an orange light on the front panel. If the printer freezes during printing, check your ink levels first to rule out an empty cartridge.

Solución paso a paso

  1. Shutdown: Disconnect the printer from power.
  2. Inspection: Open the front door and remove the black and color cartridges.
  3. Clean: Wipe the gold-colored electrical contacts on the cartridges.
  4. Replace: Replace the cartridge if empty.
  5. Restart: Reconnect and power on.

Prevención y mantenimiento

Don't print while ink levels are at zero. Keep the internal print area dust-free. Using authentic Canon ink helps prevent these issues.

Cuándo llamar a un técnico

If the error persists with new cartridges, the printhead might have suffered a permanent electrical failure and requires repair or unit replacement.

Ficha técnica del equipo

  • Technology: Inkjet
  • Resolution: Up to 4800 x 1200 dpi
  • Connectivity: USB
  • Capacity: 60 sheets
  • Compatible consumable: PG-245 and CL-246
  • Usage: Home office
  • Drivers / official firmware

Steps to follow

  1. 1

    Power off

    Unplug the printer from the wall.

  2. 2

    Remove cartridges

    Open the lid and take out the ink cartridges.

  3. 3

    Clean contacts

    Wipe the gold contacts with a dry cloth.

  4. 4

    Reinstall

    Put them back and test the printer.

Frequently asked questions

This error means the printhead is overheating, often caused by running out of ink.

Yes, printing with empty ink can cause permanent thermal damage to the printhead.

It uses the PG-245 and CL-246 ink cartridges.

Automatic cycles are sufficient; manual cleaning is only recommended if an error occurs.

Canon PIXMA TS202 error 5200: Troubleshooting Guide | Vimazdev