520ES9160 MFP

Error 520 OKI ES9160 MFP: How to Clear the Lock

The OKI ES9160 MFP error 520 is a system fault indicating a failure in the main motor rotation. This typically happens when the mechanical drive finds an unexpected obstacle or the motor loses sync. A thorough look at paper paths and a power reset are the standard first steps.

1 views

Common causes

  • 1Physical paper jam preventing main gear rotation.
  • 2Wear and tear on main motor gears from intensive use.
  • 3Toner leakage from non-OEM cartridges contaminating the mechanism.
  • 4Main motor encoder (synchronization) failure.

Solutions

Diagnóstico rápido

Error 520 is characterized by a locking noise followed by a sudden system halt. Watch to see if the rollers attempt to rotate during the startup sequence.

Solución paso a paso

  1. Check for jams: Examine all trays for paper scraps that might obstruct the motor rotation.
  2. Power reset: Unplug the unit for 3 minutes to reset the main motor's logic controller.
  3. Check consumables: Re-seat the toner cartridges to ensure they aren't blocking gears.
  4. Listen for rotation: Power on the machine and listen for a constant humming sound, suggesting a jammed motor.

Prevención y mantenimiento

Perform regular roller cleaning every 6 months. Do not force paper trays. Consumable quality is key, as faulty third-party toners can leak powder into the motor housing.

Cuándo llamar a un técnico

If the error persists after clearing debris, the main motor or synchronizing sensor is likely at end-of-life and needs replacement.

Ficha técnica del equipo

  • Technology: Color laser printer.
  • Speed: High productivity.
  • Connectivity: Integrated Gigabit LAN.
  • Capacity: Modular trays available.
  • Consumable: ES9160 series.
  • Recommended Use: Corporate office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check for jams

    Examine all trays for paper scraps that might obstruct the motor rotation.

  2. 2

    Power reset

    Unplug the unit for 3 minutes to reset the main motor's logic controller.

  3. 3

    Check consumables

    Re-seat the toner cartridges to ensure they aren't blocking gears.

  4. 4

    Listen for rotation

    Power on the machine and listen for a constant humming sound, suggesting a jammed motor.

Frequently asked questions

Error 520 occurs when the control system detects excessive resistance or no rotation in the main motor, preventing the paper feed system from operating.

If the error is due to a simple paper jam, yes. However, if the motor itself has failed, professional service is required.

It uses original ES9160 series cartridges, designed with specific gears to work in tandem with the unit's main motor.

Yes, removing excess toner dust helps keep the gears lubricated and free from obstructive buildup.

Error 520 OKI ES9160 MFP: How to Clear the Lock | Vimazdev