5005PM43c II

Honeywell PM43c II error 5005: Overheating Fix

The Honeywell PM43c II error 5005 indicates an overheating event in the printhead assembly. This prevents the printer from operating until it cools down. Why does my Honeywell PM43c II show error 5005? Excessive darkness settings combined with high-speed, continuous printing often trigger this thermal safeguard.

1 views

Common causes

  • 1Continuous 24/7 printing cycles.
  • 2High printhead darkness settings.
  • 3Blocked cooling vents.
  • 4Excessive room temperature.

Solutions

Diagnóstico rápido

If the error occurs mid-job, the printer is pushing too much current to the printhead. Let the unit rest, then lower the darkness level in your printer drivers.

Solución paso a paso

  1. Shut down the printer immediately.
  2. Check the air vents for blockages.
  3. Lower the print darkness level.
  4. Perform a printhead cleaning.

Prevención y mantenimiento

Ensure good airflow. Clean the printhead weekly. Avoid constant high-intensity printing if possible.

Cuándo llamar a un técnico

If the error displays on a cold printer, the thermal sensor is likely shorted and needs replacement.

Ficha técnica del equipo

  • Technology: Thermal Industrial.
  • Speed: High-speed.
  • Connectivity: LAN, USB, Serial.
  • Capacity: Industrial-grade.
  • Compatible Consumables: Resin/Wax ribbons.
  • Recommended Use: Enterprise.
  • Official drivers / firmware

Steps to follow

  1. 1

    Cool down

    Stop printing and power off for 15 minutes.

  2. 2

    Ventilation

    Ensure side vents are clear from obstructions.

  3. 3

    Adjust darkness

    Reduce print darkness settings in the driver.

  4. 4

    Clean head

    Clean the printhead to ensure efficient thermal transfer.

Frequently asked questions

The printhead temperature sensor has exceeded safety limits due to intense use or high darkness settings.

Yes, excessive heat can cause permanent printhead damage and dead pixels.

Resin ribbons require more heat than wax; ensure settings match your media type.

Regular printhead cleaning and moderate darkness settings reduce the stress on the printhead.

Honeywell PM43c II error 5005: Overheating Fix | Vimazdev