5001PD45S RFID Industrial

Error 5001 Honeywell PD45S RFID Industrial: Fix

The Honeywell PD45S RFID Industrial error 5001 is a common calibration fault. It indicates that the printer's media sensor cannot successfully detect the label gap or mark, meaning the printing alignment is compromised.

1 views

Common causes

  • 1Dirty label sensor.
  • 2Wrong sensor type configured.
  • 3Media path misalignment.
  • 4Sensor component failure.

Solutions

Quick Diagnosis

Error 5001 implies the sensor cannot 'see' the labels. Check if the labels are sitting flush in the printhead assembly.

Step-by-Step Solution

  1. Feed labels manually under the sensor guide.
  2. Navigate to 'Media Settings' on the main display.
  3. Select 'Media Calibration'.
  4. Follow on-screen prompts to complete the sensor learning process.

Prevention and Maintenance

Keep the sensor path clean of adhesive residue. Regularly inspect the printhead for ribbon wrinkling.

When to Call a Technician

If calibration continues to fail after cleaning, the optical sensor unit may require professional calibration or part replacement.

Device Technical Data

  • Technology: Industrial Thermal RFID
  • Resolution: Up to 600 dpi
  • Connectivity: USB, Ethernet, RS-232
  • Compatible Consumable: Honeywell Thermal Ribbons
  • Feed Capacity: 8-inch rolls
  • Recommended Use: Logistics/Supply Chain
  • Official Drivers / Support
Error 5001 Honeywell PD45S RFID Industrial: Fix | Vimazdev