50.xxHP LaserJet Tank 1005w

HP LaserJet Tank 1005w Error 50.xx: Fuser Fix Guide

The 50.xx error code on the HP LaserJet Tank 1005w indicates a critical issue with the fuser assembly, usually related to temperature or power supply. This error occurs when the fuser fails to reach the required heat to bond the toner to the paper. The immediate solution involves checking electrical connections and performing a hard reset.

1 views

Common causes

  • 1Unstable voltage: Power fluctuations preventing the fuser from reaching operating temperature.
  • 2Physical wear: End-of-life for internal fuser heating elements.
  • 3Paper jam history: Previous jams potentially damaging internal sensors.
  • 4Thermistor failure: Faulty sensor reading triggering a safety shutdown.

Solutions

Diagnóstico rápido

Error 50.xx is identified when the printer stops responding during the warm-up cycle. If the message persists after a reboot, it often indicates a faulty thermistor or a broken fuser lamp.

Solución paso a paso

  1. Power off the printer and disconnect the power cord from the wall outlet.
  2. Wait 60 seconds to allow the fuser to cool down and discharge internal capacitors.
  3. Plug directly into a wall outlet, avoiding power strips or surge protectors that may restrict current.
  4. Turn the printer on and monitor the display for the initialization process.

Prevención y mantenimiento

  • Power stability: Use a dedicated wall outlet to ensure consistent voltage.
  • Dry environment: Keep the device away from humid areas to prevent condensation on the fuser.
  • Usage cycle: Adhere to the recommended monthly duty cycle to prevent premature fuser wear.

Cuándo llamar a un técnico

If the error persists after testing on a different outlet and performing a reset, the fuser assembly likely requires physical replacement by a certified technician.

Ficha técnica del equipo

  • Technology: Monochrome laser printer (refillable toner tank)
  • Speed/Output: Up to 22 ppm
  • Connectivity: USB 2.0, Wi-Fi 802.11b/g/n
  • Input Capacity: 150-sheet input tray
  • Compatible Consumable: HP 154A (W1540A) / HP 154X (W1540X)
  • Recommended Use: Home or small office
  • Official Drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Disconnect the power cable while the unit is on.

  2. 2

    Electrical verification

    Test using a different wall outlet away from high-power devices.

  3. 3

    System reset

    Hold the power button for 15 seconds after reconnecting.

Frequently asked questions

Yes, it is a critical hardware error that prevents printing. Do not force the machine if the error persists.

Unplug the unit for a full minute and reconnect it directly to a wall power source.

It uses the HP 154A or 154X toner reload kits designed specifically for the Tank series.

Light cleaning should be performed every time you replace or refill the toner kit.

HP LaserJet Tank 1005w Error 50.xx: Fuser Fix Guide | Vimazdev