49.xxHP LaserJet Tank 1005w

HP LaserJet Tank 1005w Error 49.xx: Firmware Fix

The 49.xx error code on the HP LaserJet Tank 1005w is a general firmware or processor fault, often caused by data flow interruptions or corrupted print jobs. The solution usually involves clearing the print queue and performing a factory reset if necessary. This error frequently appears in environments with unstable wireless connectivity.

1 views

Common causes

  • 1Buffer overflow: Too much data sent to the printer's memory simultaneously.
  • 2Incompatible driver: Using a generic driver instead of the official HP solution.
  • 3Network interruption: Intermittent drops causing corrupted data flow.
  • 4Corrupted file: A faulty PDF or image format that the internal processor cannot render.

Solutions

Diagnóstico rápido

This error presents as a frozen control panel or flashing lights. If it occurs when sending documents, the cause is likely a disrupted data transfer between the PC and the printer.

Solución paso a paso

  1. Cancel print jobs: Clear all pending documents from your computer's print queue.
  2. Disconnect network: Switch off Wi-Fi or unplug the USB cable during the restart process.
  3. Power cycle: Unplug the power cable for 30 seconds and then restart the machine.
  4. Update firmware: If the error persists, download the latest version from the HP support portal.

Prevención y mantenimiento

  • Update drivers: Always keep the latest HP LaserJet driver installed on your host devices.
  • Stable network: Ensure the printer's Wi-Fi signal is strong to prevent data packet corruption.
  • File management: Avoid sending excessively complex documents or heavy font files that may saturate the memory.

Cuándo llamar a un técnico

If the error continues after a firmware update and testing on different machines, there may be a defect in the formatter board that requires professional repair.

Ficha técnica del equipo

  • Technology: Monochrome laser printer (refillable toner tank)
  • Speed/Output: Up to 22 ppm
  • Connectivity: USB 2.0, Wi-Fi 802.11b/g/n
  • Input Capacity: 150-sheet input tray
  • Compatible Consumable: HP 154A (W1540A) / HP 154X (W1540X)
  • Recommended Use: Home or small office
  • Official Drivers / firmware

Steps to follow

  1. 1

    Clear spooler

    Go to Control Panel > Printers and cancel all pending tasks.

  2. 2

    Disconnect data

    Unplug the USB cable or disable the router temporarily.

  3. 3

    Hard reset

    Power the printer off and on without a network connection.

Frequently asked questions

It is a software annoyance that rarely indicates permanent physical damage to the equipment.

Yes, usually a full power cycle and clearing the print queue resolve the conflict.

It uses the refillable HP 154 (A or X) series toner kits.

Keep your printer updated with the latest firmware from the official HP support page.

HP LaserJet Tank 1005w Error 49.xx: Firmware Fix | Vimazdev