42-02B2236i

Lexmark B2236i 42-02 error: Paper fix

The Lexmark B2236i 42-02 error appears when the printer detects a conflict with the paper size loaded in the tray. This fault prevents the unit from processing the task, requesting verification between what is set in the system and what is physically present in the compartment. It is a common error resulting from incorrect configuration settings.

1 views

Common causes

  • 1Mismatch between software size settings and physical tray paper.
  • 2Tray paper guides positioned incorrectly.
  • 3Paper size sensor obstructed by dust.
  • 4Communication conflict between print driver and configured tray.

Solutions

Quick Diagnosis

If the 42-02 error appears when trying to print, check the LCD panel: it usually specifies which tray is causing the trouble. If the paper guides are loose or the size sensor is dirty, the unit will trigger this alert automatically.

Step-by-Step Solution

  1. Check paper size settings: Enter the printer menu and verify that the paper size configured in the tray matches the physical paper loaded.
  2. Adjust tray guides: Slide the tray width guides so they fit firmly against the edges of the paper without buckling it.
  3. Clear pending jobs: Cancel the print job in the queue, restart the printer, and resend the document.

Prevention and Maintenance

Periodically verify that tray guides are not forced and that size sensors are free from paper scraps. Using standard, well-ventilated paper helps the size sensor read the document correctly.

When to Call a Technician

If the error persists after correctly setting the size on the panel and adjusting the guides, there could be a fault in the paper size sensor that requires technical repair.

Equipment Technical Data

  • Technology: Monochrome laser.
  • Speed: 36 ppm.
  • Connectivity: USB, Ethernet, WiFi.
  • Compatible consumables: B222 toner series, B220 imaging unit.
  • Recommended use: Small office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check paper size settings

    Enter the printer menu and verify that the paper size configured in the tray matches the physical paper loaded.

  2. 2

    Adjust tray guides

    Slide the tray width guides so they fit firmly against the edges of the paper without buckling it.

  3. 3

    Clear pending jobs

    Cancel the print job in the queue, restart the printer, and resend the document.

Frequently asked questions

The 42-02 error indicates a mismatch between the paper size configured on the control panel and the physical size detected by the tray sensors.

No, the device will stop for safety to prevent paper jams or printing on the wrong part of the sheet.

It uses the Lexmark B222 toner cartridge series and B220 imaging unit.

Always ensure the guides are well-aligned and that the tray configuration in the software matches the physical setup.

Lexmark B2236i 42-02 error: Paper fix | Vimazdev