412ES9130

OKI ES9130 error 412: Solving Paper Tray Issues

The OKI ES9130 error 412 is a common indicator of a paper feed failure or tray detection issue. This prevents the printer from starting the engine for print jobs. Understanding whether the root is a simple sensor obstruction or hardware wear is key to resolving the OKI ES9130 error 412.

1 views

Common causes

  • 1Dust build-up on paper tray sensors.
  • 2Worn or glazed rubber feed rollers.
  • 3Improperly set paper guides causing tray misdetection.
  • 4Debris from label adhesive in the paper path.

Solutions

Diagnóstico rápido

If removing and reinserting the paper tray doesn't clear the error 412, check for small paper scraps stuck near the paper path sensors, as this often triggers the fault state.

Solución paso a paso

  1. Extract the paper tray to inspect the internal cavity.
  2. Look for obstructions or torn pieces of paper along the feed path.
  3. Clean the rubber rollers with a lint-free cloth and isopropyl alcohol.
  4. Adjust the paper guides to ensure they fit snugly against your current paper size.

Prevención y mantenimiento

Perform roller cleaning every 20,000 impressions to prevent dust accumulation. Never load damp or damaged paper, as this drastically reduces roller lifespan and can lead to frequent 412 error warnings.

Cuándo llamar a un técnico

If the rollers rotate but paper feed fails, or if the system reports the error even without a tray inserted, the internal feed clutch may need repair.

Ficha técnica del equipo

  • Technology: Monochrome laser printer.
  • Input Capacity: 550-sheet standard tray.
  • Connectivity: USB/Ethernet.
  • Compatible supplies: ES9130 Series Toner.
  • Maintenance: Monthly roller cleaning recommended.
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove tray

    Pull the paper tray out from the base of the printer completely.

  2. 2

    Clean sensors

    Use canned air to blow out dust from the feed rollers and tray area.

  3. 3

    Check paper

    Ensure the paper stack is neatly aligned and within the tray guides.

Frequently asked questions

Error 412 happens when the printer fails to detect the paper tray or when sensors in the feed path are blocked.

This error stops printing, so troubleshooting is required to resume operations.

This model is designed to use high-yield ES9130 series toner.

Keep the rollers clean and avoid overloading the tray or using low-quality/damp paper.