410MC873dnv Enterprise

OKI MC873dnv Enterprise error 410: Network failure

The OKI MC873dnv Enterprise error 410 is a communication notification that occurs when the printer loses connection with the print server or fails to acquire a valid IP address. It is a recurring problem in office environments with dynamic IP settings. Knowing why my OKI MC873dnv Enterprise has error 410 allows you to apply corrective measures in connectivity settings.

1 views

Common causes

  • 1IP address assignment failure (DHCP).
  • 2Damaged Ethernet cable.
  • 3Gateway misconfiguration.
  • 4Electromagnetic interference on unshielded cables.

Solutions

Diagnóstico rápido

If your local workstations cannot find the printer, error 410 will appear. Check if the Ethernet port LEDs are blinking steadily.

Solución paso a paso

  1. Unplug and reconnect the Ethernet cable at the rear of the device.
  2. Restart the router or switch connected to the unit.
  3. Verify in the printer's network menu that the IP falls within your subnet range.
  4. Consider assigning a static IP address if the issue recurs intermittently.

Prevención y mantenimiento

Use category 6 (CAT6) network cables to minimize interference. Keep the firmware updated as it addresses TCP/IP management protocol bugs.

Cuándo llamar a un técnico

If the error persists after setting a static IP and trying a new network cable, the internal network card (NIC) may have a hardware failure.

Ficha técnica del equipo

  • Technology: Laser MFP with network connectivity
  • Protocols: TCP/IP, LPR, IPP
  • Connectivity: Gigabit Ethernet
  • Supplies: OKI MC873 original toner
  • Recommended use: Corporate LAN environments
  • Drivers / official firmware

Frequently asked questions

Error 410 usually indicates that the printer cannot reach the network gateway or has an IP conflict.

Generally, restarting the printer and the network router resolves the communication issue within the local network.

Though unrelated to network settings, always use genuine toner to keep performance optimal and avoid downtime.

If the error persists, you may need to reset the network settings to factory defaults via the admin menu.