400C650n

OKI C650n 400 error: Troubleshooting guide

The OKI C650n 400 error signals a failure in the paper feeding mechanism. This typically happens when the system detects an inconsistency between the print job instructions and the actual hardware configuration of the input tray. Addressing this usually involves simple adjustments to paper orientation or tray settings. This compact powerhouse from OKI requires consistent tray management to maintain its performance.

1 views

Common causes

  • 1Misconfiguration: Tray settings do not match print job.
  • 2Worn Rollers: Friction diminished over time.
  • 3Sensor Debris: Dust blocking the paper detection switch.
  • 4Overfilling: Tray loaded beyond recommended capacity.

Solutions

Quick Diagnosis

This error triggers when the paper tray fails to load sheets as instructed. Confirm the panel message to see if a manual intervention or a restart is needed.

Step-by-Step Solution

  1. Check tray: Ensure paper is not warped.
  2. Verify settings: Match paper size in driver and printer.
  3. Clean rollers: Remove dust from pickup tires.
  4. Restart: Perform a full power cycle.

Prevention and Maintenance

Store paper in a dry place to prevent moisture issues that cause feed errors. Clean rubber rollers every few months.

When to Call a Technician

If the rollers have been cleaned and the error remains, the feed clutch may need replacement.

Device Specifications

  • Technology: Digital LED
  • Speed: 35 ppm
  • Connectivity: USB, Ethernet
  • Feed Capacity: 250 sheets
  • Consumables: OKI C650 toner series
  • Recommended Use: Professional office workspace
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check tray

    Remove the paper tray and ensure guides are properly locked.

  2. 2

    Verify settings

    Make sure the printer settings match the actual paper size.

  3. 3

    Clean rollers

    Wipe pickup rollers with a damp cloth.

  4. 4

    Restart

    Close the tray and cycle the power.

Frequently asked questions

The 400 error indicates a paper feed failure, usually due to a mismatch in settings or a blockage.

Yes, as it halts the printer's ability to feed paper and proceed with print jobs.

This printer is compatible with the OKI C650 toner series.

Keep the tray guides snug against the paper stack and ensure paper is not overloaded.