400OKI C650dn

OKI C650dn Error 400: Troubleshooting Network Issues

The Error 400 on the OKI C650dn occurs when the printer receives an invalid request from the network. This is often related to HTTP communication errors or IP conflicts within the local network environment. Addressing this promptly ensures your printer remains visible and accessible to all workstations.

2 views

Common causes

  • 1Malformed HTTP requests sent by the print driver.
  • 2Local network IP address conflicts.
  • 3Outdated firmware failing to handle modern network packets.

Solutions

Power Cycle Network Interfaces

  1. Switch off the printer using the main power button.
  2. Disconnect the network cable for at least 30 seconds.
  3. Power on the printer and wait for it to reach 'Ready' status.
  4. Reconnect the network cable and verify the connection.

Verify IP Configuration

  1. Access the web interface using the printer's current IP address.
  2. Go to the 'Network' tab settings.
  3. Check for any IP conflicts or invalid DNS entries.

Steps to follow

  1. 1

    Physical Disconnect

    Power off the unit and remove the RJ45 network cable for one minute.

  2. 2

    Check Network Configuration

    Print the network configuration page from the front panel to verify current settings.

  3. 3

    Update Firmware

    Download the latest firmware version from OKI's official site and install it via the web interface.

Frequently asked questions

No, it is a software and network communication error, not a physical hardware failure.

If restarting the printer does not resolve the issue, reinstalling the print driver can clear corrupt configurations.

No, the error is isolated to network communication and will not affect toner or mechanical components.