36-paper-jamE250dn

Lexmark E250dn 36 Error: Paper Jam Fix

The Lexmark E250dn error 36 is a paper jam warning specific to the printer's fuser area. Why does my Lexmark E250dn say error 36? It occurs when a sheet of paper fails to exit the printer cleanly, often due to physical obstruction in the rear exit path.

1 views

Common causes

  • 1Misaligned media guides in the tray
  • 2Damp paper causing feed failure
  • 3Build-up of paper dust in output rollers
  • 4Incompatible media labels or heavy cardstock

Solutions

Diagnóstico rápido

Check the rear exit tray. If you see paper, the error 36 is confirming the exit path is blocked. The printer will not print until the sensor is cleared.

Solución paso a paso

  1. Open rear door: Open the back door of the printer to locate the fusing unit area.
  2. Remove paper: Gently pull the jammed sheet out, ensuring no torn pieces remain inside.
  3. Close and reset: Close the rear door and press the start button to clear the fault.

Prevención y mantenimiento

Use fresh, dry paper stock. Periodically clean the exit rollers to prevent paper slip and accumulation of debris.

Cuándo llamar a un técnico

If you find damaged rollers or internal broken plastic guides, call professional support to replace the failing parts.

Ficha técnica del equipo

  • Technology: Monochrome laser
  • Speed: Up to 30 ppm
  • Connectivity: USB, Ethernet
  • Capacity: 250-sheet tray
  • Compatible Consumables: E250/E350 toner series
  • Recommended Use: Small office environment
  • Official Lexmark support

Steps to follow

  1. 1

    Open rear door

    Open the back door of the printer to locate the fusing unit area.

  2. 2

    Remove paper

    Gently pull the jammed sheet out, ensuring no torn pieces remain inside.

  3. 3

    Close and reset

    Close the rear door and press the start button to clear the fault.

Frequently asked questions

Error 36 signifies a paper jam located specifically at the exit path near the fuser unit.

It is safer to turn off the printer as the fuser area is extremely hot during operation.

The E250/E350 toner series is compatible with this device.

Ensure your paper guides are aligned properly and never exceed the maximum tray capacity.

Lexmark E250dn 36 Error: Paper Jam Fix | Vimazdev