36e120n

Lexmark E120n error 36: Memory problems

The Lexmark E120n error 36 indicates a memory capacity error or internal overflow during a print job. This occurs when sending heavy files that exceed the printer's available RAM. Clearing the print queue usually resolves the blockage.

1 views

Common causes

  • 1Insufficient RAM for file size.
  • 2Unsupported fonts or heavy graphics in document.
  • 3Corrupt pending print queue.
  • 4Outdated print drivers.

Solutions

Quick Diagnosis

Identified when the error occurs while sending a large file. The error light flashes, indicating the device cannot process the data block.

Step-by-Step Solution

  1. Cancel all pending jobs in your computer's print queue.
  2. Turn off the printer for 2 minutes to flush the RAM.
  3. Reduce file resolution or print in sections.
  4. Restart the file sending process.

Prevention and Maintenance

Avoid mass sending of high-res PDF documents. If high-volume printing is required, use a print server for better queue management.

When to Call a Technician

If the error persists with a simple test page, it could be a hardware memory module failure.

Technical Data

Frequently asked questions

It occurs when the document is too complex or the RAM is full.

Cancel pending print jobs, reboot the device, and simplify the file.

The error is not supply-related, but original toner is recommended for faster processing.

It happens when printing high-resolution PDFs on an entry-level device.

Lexmark E120n error 36: Memory problems | Vimazdev