35.01MX410de

Lexmark MX410de Error 35.01: Sensor Failure

The Lexmark MX410de error 35.01 notifies that the paper detection sensor at the input (or feed unit) has detected an anomaly. This often occurs when small labels or scraps of paper block the sensor actuator. A visual inspection is usually sufficient.

0 views

Common causes

  • 1Sensor obstruction by tiny adhesive labels.
  • 2Pickup roller wear causing timing errors.
  • 3Dust accumulated in the mechanical sensor actuator.
  • 4Optical sensor failure due to internal cable short.

Solutions

Quick Diagnosis

The 35.01 is a hardware error warning detected by the paper path sensors.

Step-by-Step Solution

  1. Feed Inspection: Remove the paper tray and search for tiny pieces blocking the sensor.
  2. Clean Sensors: Use compressed air to clean the feed sensor cavity.
  3. Reset: Open and close the front door to reset the system status.

Maintenance and Prevention

Regularly clean the pickup rollers with a clean, dry cloth to prevent paper slippage and timing errors.

When to Call a Technician

If the 35.01 error persists without paper in the tray at startup, the sensor is likely physically broken or disconnected.

Device Technical Specs

  • Technology: Laser Multifunction
  • Speed: 40 ppm
  • Connectivity: Gigabit Ethernet/USB
  • Consumable: Series 60 Cartridge
  • Support: Lexmark Support.

Frequently asked questions

It indicates the paper input sensor has detected a jam or inconsistency in sheet arrival.

It is not critical, but stops all printing tasks until the path is cleared.

Uses Lexmark 60 series cartridges and a specialized maintenance kit.

If the error keeps appearing at startup after cleaning the paper feed area, the sensor may require replacement.

Lexmark MX410de Error 35.01: Sensor Failure | Vimazdev