35E360d

Lexmark E360d error 35: Communication Failure

Lexmark E360d error 35 is a data link failure. The host computer is not recognizing the printer. This is typically resolved by checking cables or updating printer drivers.

1 views

Common causes

1Interference.
2Bad cable.
3Low power USB port.
4Driver corruptions.

Solutions

Quick diagnosis

If the printer is showing 'Error 35', the communication link is broken. Swap the USB cable and check the computer side for driver status.

Step-by-step solution

Disconnect USB cable.
Restart both devices.
Connect to a rear motherboard USB port on the PC.
Update printer drivers.

Prevention and maintenance

Use shielded USB cables to prevent interference.

When to call a technician

If the port is damaged, the interface board may need repair.

Technical specifications

Technology: Laser
Consumable: Toner
Connectivity: USB
Official drivers / firmware

Steps to follow

1
Reset
Unplug the printer and clear PC connection.
2
Swap cable
Use a fresh, high-quality USB cable.
3
Check ports
Connect to a different PC USB port.

Frequently asked questions

It means the PC is not receiving a stable signal from the printer.

No, it is usually a connection or driver issue.

No, the internal mechanics are fine.

Keep USB cables short to avoid signal drop-offs.