33-100P3255DN

Pantum P3255DN error 33-100: Toner issues

Pantum P3255DN error 33-100 indicates an issue with the toner cartridge detection system. The machine stops to ensure the consumible status is valid. Understanding why is my Pantum P3255DN showing error 33-100 helps avoid unnecessary cartridge replacement.

0 views

Common causes

  • 1Genuine empty toner cartridge.
  • 2Dirty, oxidised, or misaligned toner chip.
  • 3Firmware-chip incompatibility.
  • 4Dirty or damaged internal printer contacts.

Solutions

Diagnóstico rápido

The error 33-100 is clearly marked on the display as a 'Toner Low' or 'Chip Unrecognized' issue. Verify if the cartridge is near empty or if it just needs a quick contact cleaning.

Solución paso a paso

  1. Open the front door and extract the toner cartridge.
  2. Check the metal chip on the side of the toner; clean it gently with a dry cloth.
  3. Clean the internal printer contacts to remove any dust blocking the connection.
  4. Reinsert the toner cartridge to test for proper detection.

Prevención y mantenimiento

Use genuine or high-quality compatible cartridges to ensure the chip is compatible with your firmware. Keep the printer interior clean to avoid connection errors.

Cuándo llamar a un técnico

If persistent cleaning of the chip does not resolve the error, the printer's chip reader board could be faulty.

Ficha técnica del equipo

  • Technology: Laser printing
  • Performance: 35 ppm
  • Connectivity: USB, Ethernet
  • Paper Capacity: 250 sheets
  • Compatible consumables: TL-410 / DL-410 series
  • Recommended use: Office volume
  • Drivers / official firmware

Steps to follow

  1. 1

    Remove cartridge

    Open the front cover and carefully pull out the toner cartridge.

  2. 2

    Clean chip contacts

    Wipe the toner chip with a dry, clean lint-free cloth to ensure proper recognition.

  3. 3

    Reinstall toner

    Slide the cartridge back in until it clicks into position.

Frequently asked questions

This indicates that the toner level is low or the printer chip is not communicating with the machine.

If the toner is truly empty, it needs replacement. If it's a chip communication issue, cleaning might fix it.

Use the TL-410 series. Ensure your cartridge chip matches your firmware version.

Cleaning the internal printer contacts where the chip sits is also recommended.