322MB261

OKI MB261 Error 322: Paper Jam Fix

The OKI MB261 error 322 alerts you to a paper jam within the transportation path. This usually happens when the paper is delayed while moving between the tray and the exit point due to debris, improper guide settings, or paper thickness issues. A careful removal of the jammed sheet usually clears the fault.

0 views

Common causes

  • 1Jammed sheet in fuser.
  • 2Small paper scraps.
  • 3Dirty path sensors.
  • 4Worn exit rollers.

Solutions

Quick Diagnosis

If the printer halts abruptly and shows this code, there is likely a paper fragment or a sheet caught along the path.

Step-by-Step Solution

  1. Open: Access front and rear doors.
  2. Extract: Gently remove the jammed paper.
  3. Inspect: Confirm no small pieces remain.
  4. Reset: Close and let the machine cycle.

Prevention and Maintenance

Do not use paper with adhesive labels. Use compressed air to blow out dust from the paper path every few months.

When to Call a Technician

If the jam recurs without any physical paper present, a sensor might be broken and requires professional repair.

Technical Specs

  • Technology: Laser
  • Transport: Internal path
  • Consumable: MB261 Toner
  • Connection: USB/LAN
  • Support: Available
  • Support

Steps to follow

  1. 1

    Open Access

    Open the front and rear covers.

  2. 2

    Extract Paper

    Carefully pull the jammed paper along the path.

  3. 3

    Verify

    Ensure no small scraps remain.

Frequently asked questions

The printer has detected a paper jam in the internal pathway.

Always pull gently to avoid sensor damage.

Genuine MB261 series toner is best.

Clean dust every time you replace the toner cartridge.

OKI MB261 Error 322: Paper Jam Fix | Vimazdev