32.05MX822adtfe

Lexmark MX822adtfe error 32.05: Tray Jam Fix

The Lexmark MX822adtfe error 32.05 denotes a paper blockage specifically at the intake from the main tray into the print engine. This alert activates when the paper passage sensor does not register a feed event within the allotted time, usually due to a physical obstruction or worn-down rollers. This is a typical maintenance issue for busy offices.

1 views

Common causes

  • 1Poorly aligned paper stack or high humidity in the tray.
  • 2Worn feed rollers failing to grip the paper surface.
  • 3Small scraps from previous jams blocking the sensor path.
  • 4Paper weight exceeding the recommended machine capacity.

Solutions

Quick Diagnosis

The 32.05 error happens at the start of the paper path. If you open the paper drawer and see a sheet partially pulled into the machine, that is the source of the jam.

Step-by-Step Solution

  1. Pull out the main input paper tray completely.
  2. Gently remove any sheets caught at the feeding roller interface.
  3. Open the front access door to ensure no loose paper shreds remain inside the path.
  4. Wipe the rubber feed rollers with a lightly damp cloth to restore grip.

Maintenance and Prevention

Always fan the paper stock before inserting it into the tray. Do not exceed the 'Max' fill level. Periodically use a maintenance kit to clean the intake rollers and keep them from hardening.

When to Call a Technician

If you have cleared all paper but the error 32.05 continues and the machine does not attempt to feed, the paper sensor might be dirty or misaligned.

Equipment Technical Data

  • Technology: Monochrome Laser
  • Speed: Up to 55 ppm
  • Connectivity: Ethernet, USB 2.0
  • Capacity: 550 standard sheet tray
  • Compatible Consumable: 58D0X00 cartridges
  • Recommended Use: Corporate office environments
  • Official Lexmark Drivers

Steps to follow

  1. 1

    Remove tray

    Fully withdraw the paper input tray from the device.

  2. 2

    Inspect path

    Search for any paper debris or obstructions in the intake channel.

  3. 3

    Clean rollers

    Wipe the pickup rollers with a damp, lint-free cloth.

Frequently asked questions

The input sensor detected that a sheet failed to advance correctly from the tray.

It is a standard jam, but ensure all small paper shreds are cleared to prevent future triggers.

Uses the 58D0X00 cartridge family.

Clean them every 50,000 pages or immediately if feed issues start occurring.