32.05M3250

Lexmark M3250 error 32.05: Paper Feed Troubleshooting

The Lexmark M3250 error 32.05 occurs when paper fails to arrive at the registration sensor within the allotted timing. This usually points to traction issues in the feed rollers or poor paper loading. Consistent maintenance of the paper path resolves this issue.

1 views

Common causes

  • 1Worn feed rollers.
  • 2Incorrect paper size in tray.
  • 3Dirty registration sensor.
  • 4Using incompatible cardstock.

Solutions

Quick Diagnosis

If you see 32.05, check the tray first. If no jam is visible, dirty rollers are likely causing the feed to lag.

Step-by-Step Solution

  1. Remove Tray: Pull out the main paper drawer.
  2. Wipe Rollers: Clean pick rollers with a damp cloth.
  3. Reload: Fan paper well and set guides properly.
  4. Restart: Reinsert the drawer and print.

Prevention and Maintenance

Clean pick rollers every 5,000 prints. Fan the paper stack before loading to reduce friction.

When to Call a Technician

If the motor runs but wheels don't turn, the pickup clutch might be broken.

Equipment Technical Specs

  • Technology: Mono Laser
  • Speed: 50 ppm
  • Connectivity: LAN/USB
  • Consumable: 50F Series Cartridges
  • Recommended Use: Enterprise
  • Official Drivers / firmware

Steps to follow

  1. 1

    Remove Tray

    Pull out the paper tray.

  2. 2

    Clean Rollers

    Wipe with damp cloth.

  3. 3

    Reload

    Fan the paper stack.

  4. 4

    Restart

    Reinsert the tray.

Frequently asked questions

It is a feed error where paper timing is missed.

No, cleaning the path usually fixes it.

50F series cartridges are standard.

Keep the paper path clean and load correctly.

Lexmark M3250 error 32.05: Paper Feed Troubleshooting | Vimazdev