32.05E260dn
Lexmark E260dn error 32.05: Troubleshooting Guide
Lexmark E260dn error 32.05 occurs when the device detects a mismatch in paper size. This is a common notification that helps prevent paper jams and misprints. Typically, it arises from incorrect tray configuration or sensor obstruction.
1 views
Common causes
- 1Incorrectly positioned paper in the tray.
- 2Configuration mismatch in the printer driver.
- 3Dust buildup on the paper size sensor.
- 4Using non-standard paper stock.
Solutions
Diagnóstico rápido
If you see the Lexmark E260dn error 32.05 code, the internal sensor is signaling a paper size conflict. Check the tray settings and ensure the physical paper guides are aligned.Solución paso a paso
- Ensure paper is flush with the tray guides.
- Navigate to the Paper Menu on the control panel.
- Manually select the specific paper size you are using.
- Perform a power cycle by unplugging the printer.
Prevención y mantenimiento
Regularly clean the feed rollers and use high-quality paper. Genuine consumables are recommended to avoid sensor misreads.Cuándo llamar a un técnico
If the error remains after troubleshooting, the paper sensor assembly may be damaged.Ficha técnica del equipo
- Technology: Monochrome Laser
- Speed: 35 ppm
- Connectivity: USB and Ethernet
- Capacity: 250 sheets
- Consumable: E260 toner series
- Recommended Use: Home office
- Official drivers / firmware
Steps to follow
- 1
Check tray
Ensure the paper stack is correctly aligned in the tray.
- 2
Update settings
Access the paper menu and confirm the correct paper size.
- 3
Restart
Power cycle the device to clear the error status.
Frequently asked questions
The error occurs when the printer sensor detects a different paper size than the one defined in the print settings.
No, it is a configuration warning that can be cleared by correcting the paper tray alignment.
It uses the E260A or E260X series toner cartridges.
Keep the feed rollers clean and always ensure the paper guides are snug against the paper.