32.02C3326dw

Lexmark C3326dw error 32.02: Paper size fix

The Lexmark C3326dw error 32.02 happens when the detected paper size doesn't match the print driver's setting. You can easily fix this by aligning the tray guides and updating the printer panel menu.

1 views

Common causes

  • 1Incorrect tray guides.
  • 2Software mismatch.
  • 3Wrong paper format loaded.
  • 4Sensor misreading.

Solutions

Quick Diagnosis

Check if the guides inside the tray are tight against the paper. If the printer feels a size mismatch, it will trigger error 32.02.

Step-by-Step Solution

  1. Remove the tray entirely.
  2. Adjust the sliding guides to firmly fit the paper stack.
  3. In the control panel, navigate to 'Paper Menu'.
  4. Set 'Paper Size' to match the actual loaded paper.

Prevention and Maintenance

Always keep the paper stack neat. Periodically dust out the tray area to keep sensors functioning correctly.

When to Call a Technician

If you have properly adjusted the tray and the error remains, the tray size sensor may require a replacement.

Equipment Technical Data

  • Technology: Compact Color Laser
  • Speed: 26 ppm
  • Compatible Consumable: C3326 / C3426 Series
  • Drivers / firmware: https://www.lexmark.com/support/c3326dw

Frequently asked questions

Align the tray guides and ensure the menu settings match the physical paper.

It is a configuration conflict between physical load and software selection.

Original C3326 series cartridges are recommended for best hardware health.

Keep the tray clean of paper dust once a month.

Lexmark C3326dw error 32.02: Paper size fix | Vimazdev