32.01mx822adxe

Fix Lexmark MX822adxe 32.01 Paper Jam Error

The Lexmark MX822adxe 32.01 error code marks a paper jam somewhere within the printer's path. The system halts to prevent the internal rollers from dragging torn paper through the fuser, which could lead to more severe damage. Users asking why my Lexmark MX822adxe 32.01 error occurs will usually find a simple paper obstruction.

1 views

Common causes

  • 1Paper registration jam.
  • 2Moisture in paper stock.
  • 3Torn paper pieces blocking sensors.
  • 4Dirty feed rollers.

Solutions

Quick Diagnosis

If you see error 32.01, verify the paper path. Paper often gets stuck near the registration area if sheets are curled or if the input trays are overloaded.

Step-by-Step Solution

  1. Turn off the printer.
  2. Open the side covers and pull out any jammed paper.
  3. Ensure all small torn fragments are removed from the rollers.
  4. Close the panels and wait for the printer to reset itself.

Prevention and Maintenance

Store paper in a dry, cool area. Moisture is the number one cause of feeding issues in laser printers.

When to Call a Technician

If the error persists despite the path being completely clear, a sensor in the transport path might be obstructed or broken.

Technical Specs

  • Technology: Multifunction Laser
  • Speed: 55 ppm
  • Consumable: 58D Toner series
  • Official Drivers

Steps to follow

  1. 1

    Open access

    Open side panels to reveal the paper path.

  2. 2

    Remove media

    Carefully pull the jammed paper along its natural path.

  3. 3

    Close and reset

    Close all panels and the printer will auto-check.

Frequently asked questions

This code identifies a paper jam within the transport or registration area.

Always pull paper gently in the direction of travel to prevent tearing.

Genuine 58D toner helps ensure stable sensor readings.

Avoid using damp paper and maintain clean feed rollers.

Fix Lexmark MX822adxe 32.01 Paper Jam Error | Vimazdev