32.01C4342

Lexmark C4342 error 32.01: Output Paper Jam

The Lexmark C4342 error 32.01 occurs when a sheet jams in the printer's output section. To fix error 32.01 on C4342, remove the sheet carefully from the exit tray area. Why does my Lexmark C4342 show error 32.01? Usually because the paper is not flat or the exit bin is overstuffed with documents, causing a stall.

1 views

Common causes

  • 1Overloaded exit bin causing back-pressure.
  • 2Worn or heavy-weight paper causing curl.
  • 3Debris or labels obstructing the path.
  • 4Sensor malfunction at the printer exit.

Solutions

Diagnóstico rápido

Error 32.01 occurs when the exit sensor fails to clear in time. If you see paper protruding, pull it out gently. What is the Lexmark 32.01 error meaning? It's a physical blockage in the final print path.

Solución paso a paso

  1. Open the exit gate or rear cover.
  2. Grasp the jammed sheet and pull steadily without tearing.
  3. Inspect the path for any remaining torn bits of paper.
  4. Snap the cover back into its locked position.
  5. Press the Resume button to continue printing.

Prevención y mantenimiento

Do not allow the exit bin to accumulate too many sheets. Fan the paper before loading to remove dust and static electricity, which reduces output issues.

Cuándo llamar a un técnico

If the path is perfectly clear but the error persists, the exit sensor may be malfunctioning and needs repair.

Ficha técnica del equipo

  • Technology: Monochrome laser.
  • Speed: 42 ppm.
  • Output capacity: 250 sheets.
  • Consumible compatible: C4342 Series Toner.
  • Recommended usage: Office environments.
  • Official drivers / firmware

Steps to follow

  1. 1

    Open Exit

    Open the rear exit door or top bin where the printed sheets accumulate.

  2. 2

    Clear Jam

    Pull the jammed paper slowly to avoid leaving tiny pieces inside.

  3. 3

    Restart

    Close all doors securely and press the 'Continue' button on the control panel.

Frequently asked questions

It indicates a paper jam at the exit area, just past the fuser. The sensor did not detect the sheet exiting correctly.

Yes, usually you just need to pull the blocked sheet out and verify the path is clear of any debris.

Avoid overloading the exit tray and make sure paper is perfectly flat before printing.

It uses C4342 series toner. While not a direct cause of jams, damaged consumables can affect print quality and consistency.

Lexmark C4342 error 32.01: Output Paper Jam | Vimazdev