320MB260

OKI MB260 Error 320: Troubleshooting Steps

The OKI MB260 error 320 relates to the Automatic Document Feeder (ADF) system. It indicates that the scanner module is failing to process documents due to a jam or sensor error. This is a robust office multifunction device.

0 views

Common causes

  • 1Dirty ADF rollers.
  • 2Internal paper jam.
  • 3Faulty paper sensor.
  • 4Firmware communication glitch.

Solutions

Diagnóstico rápido

Check the ADF tray for skewed paper or visible obstructions. The printer will often halt scanning tasks immediately.

Solución paso a paso

  1. Remove all documents from the ADF.
  2. Open the scanner lid and clear debris.
  3. Clean rollers with a lint-free cloth.
  4. Power cycle the unit.

Prevención y mantenimiento

Keep rollers free of dust. Use high-quality paper in the feeder.

Cuándo llamar a un técnico

If the error persists after maintenance, the motor or sensor may be broken.

Ficha técnica del equipo

  • Technology: LED MFP
  • Speed: 26 ppm
  • Consumable: MB260 Series Toner
  • Usage: Small office
  • Official Drivers

Steps to follow

  1. 1

    Clear ADF

    Remove paper.

  2. 2

    Inspect

    Check for obstructions.

  3. 3

    Clean

    Wipe rollers.

  4. 4

    Reset

    Turn off/on.

Frequently asked questions

It indicates a failure in the ADF document scanner system.

It only impacts scanning, printing should work fine.

Use genuine MB260 series toner cartridges.

Wipe the feed rollers every month.

OKI MB260 Error 320: Troubleshooting Steps | Vimazdev