32-04C2240

Lexmark C2240 error 32.04: Paper Feed Solution

The Lexmark C2240 error 32.04 is a paper feeding fault indicating that a sheet failed to reach the sensor in time. This is commonly caused by worn rollers or incorrect tray adjustments. Follow these steps to resolve the issue and ensure your paper is feeding correctly.

1 views

Common causes

  • 1Worn-out rubber pickup rollers.
  • 2High humidity causing paper to clump.
  • 3Incorrect tray guide width settings.
  • 4Toner dust buildup on registration sensors.

Solutions

Diagnosis

Error 32.04 occurs when the engine attempts to pull paper but the registration sensor fails to signal that the sheet has arrived. It is the most common reason for users asking: why is my Lexmark C2240 showing error 32.04?.

Step-by-Step Fix

  1. Remove the paper tray and check the paper stack.
  2. Adjust the tray guides to snug against the paper edge without squeezing.
  3. Clean the pickup rollers with a damp cloth.
  4. Reload the tray, making sure the paper is flush against the back of the tray.

Maintenance

Fan paper resmas to break static adhesion. Clean feed rollers every 10,000 pages to maintain grip. Ensure thick media settings are used for specialized cardstock.

When to Call Support

If the feed error persists with new paper and after roller cleaning, the internal paper feed clutch or solenoid may require replacement.

Technical Specifications

  • Technology: Color Laser.
  • Speed: 40 ppm.
  • Connectivity: Gigabit Ethernet, USB.
  • Feeding: 250-sheet standard tray.
  • Supplies: Lexmark 50F Series.
  • Usage: Heavy-duty office environments.
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Remove Tray

    Fully remove the bottom paper tray from the printer.

  2. 2

    Inspection

    Check the paper path and pickup area for any debris or misplaced sheets.

  3. 3

    Reset

    Ensure the paper stack is neatly aligned in the tray and re-insert, then hit OK.

Frequently asked questions

This error means the paper did not reach the registration sensor within the allotted timeout period.

No, the printer locks all operations until the path is cleared and the tray is reseated.

Genuine Lexmark toner is best; recycled toner often spills and coats the internal paper sensors.

Fan your paper stack before loading and keep the printer in a low-humidity room to prevent paper sticking.

Lexmark C2240 error 32.04: Paper Feed Solution | Vimazdev