30.01.06LaserJet Pro M404dn

Error 30.01.06 HP LaserJet Pro M404dn: Scanner Fix

Code 30.01.06 typically appears on HP LaserJet Pro M404dn models when there is a communication issue between the controller and the scanning unit. Even though the M404dn is primarily a printer, this error can be triggered by positioning sensors or internal firmware configurations. Follow this guide to rule out software faults before considering technical service.

0 views

Common causes

  • 1Corruption of temporary files in the printer's volatile memory.
  • 2Incompatibility between the current firmware version and the OS.
  • 3Blocked or dirty scanner positioning sensor.

Solutions

Firmware Update

  1. Navigate to the official HP support website.
  2. Search for the LaserJet Pro M404dn model.
  3. Download the latest firmware version.
  4. Run the installer with the printer connected via USB.

Connection Verification

  1. Ensure all cables are securely connected.
  2. Perform a factory reset if the issue persists after updating.
  3. Check for any hidden jams in the input tray.

Steps to follow

  1. 1

    Disconnect peripherals

    Disconnect USB and network cables to isolate the printer.

  2. 2

    Master reset

    Hold the power button for 30 seconds while unplugged.

  3. 3

    Forced update

    If the menu allows, reinstall the firmware from a USB drive.

Frequently asked questions

It is generally an internal firmware communication error that can be fixed by updating or performing a system reboot.

While it is usually software, if it persists after reinstalling the firmware, it may indicate a failure on the main board.

A factory reset will erase custom settings and IP configurations, so you will need to reconfigure them afterwards.

Error 30.01.06 HP LaserJet Pro M404dn: Scanner Fix | Vimazdev