202.01cs963se

Lexmark CS963se 202.01 Error: Quick Fix

The Lexmark CS963se error 202.01 is a transport failure that occurs when paper fails to arrive at the registration sensor on time. This usually indicates an issue with paper slipping or feeding delay.

1 views

Common causes

  • 1Worn feed rollers.
  • 2Damp paper causing friction.
  • 3Over-tightened paper guides.
  • 4Feeder clutch failure.

Solutions

Quick Diagnosis

Error 202.01 appears immediately if paper doesn't advance after the feed command. Identify the tray reported and clear any obstructions.

Step-by-Step Solution

  1. Access: Pull out the tray.
  2. Clear: Check for misaligned paper.
  3. Adjust: Tighten paper guides.
  4. Clean: Wipe feed rollers.
  5. Test: Reinsert and print.

Prevention and Maintenance

Do not exceed tray capacity. Keep paper dry.

When to Call a Technician

If the error persists after maintenance, the feeder clutch may need replacement.

Technical Specifications

  • Technology: Color Laser.
  • Speed: 45 ppm.
  • Connectivity: USB, Ethernet.
  • Compatible Consumables: 70C / 70X Series.
  • Recommended Use: Enterprise.
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Open

    Pull out the tray affected by the error.

  2. 2

    Clear

    Remove misaligned sheets or debris.

  3. 3

    Adjust

    Ensure paper guides fit the media size correctly.

  4. 4

    Restart

    Close the tray and retry printing.

Frequently asked questions

This code means the paper failed to reach the first sensor within the allotted time.

It's a common jam error; check your paper media quality.

It uses Lexmark 70C toner series.

Avoid overloading the tray and keep paper dry.