200.02MX722adhe

Lexmark MX722adhe Error 200.02: Paper Jam Fix

Lexmark MX722adhe error 200.02 is a common issue caused by paper jams in the feed path. This often happens due to misaligned paper guides or heavy cardstock that the feed system struggles to grip. Proper tray adjustment and regular roller cleaning are the best ways to keep your printer running smoothly.

1 views

Common causes

  • 1Misaligned side guides in the paper tray.
  • 2Paper weight exceeding printer specifications.
  • 3Dust buildup on the feed sensors.
  • 4Worn-out rubber pickup rollers.

Solutions

Diagnóstico rápido

The 200.02 error points specifically to the paper input. If there is no visible jam, check for small bits of paper stuck in the feed sensors.

Solución paso a paso

  1. Remove tray: Pull the main paper tray completely out.
  2. Clear jam: Carefully remove any wrinkled paper from the feed rollers.
  3. Alignment: Ensure the side guides snugly hold the paper stack.
  4. Restart: Reinsert the tray and press 'Continue' on the display.

Prevención y mantenimiento

Clean the pickup rollers with a lint-free cloth and check that you are using high-quality paper. Do not exceed the maximum tray capacity.

Cuándo llamar a un técnico

If you continue to experience jams after clearing the path and checking paper guides, the feed mechanism or motors may need repair.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: 50 ppm
  • Connectivity: Ethernet, USB
  • Input: 650 sheets
  • Compatible Consumables: 62D0H00 / 62D Series
  • Recommended Use: Enterprise
  • Official Drivers / firmware

Steps to follow

  1. 1

    Remove Tray

    Pull out the main paper input tray from the bottom.

  2. 2

    Clear Obstruction

    Look for jammed sheets and remove them gently without tearing.

  3. 3

    Reload

    Adjust paper guides, insert the tray, and restart.

Frequently asked questions

The paper feed sensor has detected a jam in the tray area.

Open the tray, remove the jammed paper, and ensure guides are adjusted properly.

Use standard 75-90 g/m² bond paper to ensure smooth feeding.

Yes, by cleaning pickup rollers and not overfilling the tray.