200.01MX321adn

Lexmark MX321adn error 200.01: Paper jam resolution

Lexmark MX321adn error 200.01 indicates a paper obstruction in the feed path. If you are wondering why is my Lexmark MX321adn showing error 200.01, it is usually linked to incorrect paper settings or poor-quality paper usage. Resolving this requires inspecting the input area and ensuring no remnants are left on the sensors.

1 views

Common causes

  • 1Use of paper heavier than the recommended specification.
  • 2Humid paper causing pages to clump together.
  • 3Tiny scraps of paper from previous jams blocking sensors.
  • 4Worn-out feed rollers losing their grip.

Solutions

Diagnóstico rápido

This error appears during startup. If no paper is seen, a tiny fragment blocking the entrance sensor is likely the culprit.

Solución paso a paso

  1. Open the front door and remove the toner assembly.
  2. Check the tray and remove all sheets.
  3. Use a flashlight to find paper bits in the path toward the fuser.
  4. Close the printer firmly until it latches.

Prevención y mantenimiento

Fan the paper sheets before loading. Adjust the tray guides snugly to the paper width to preventskewing.

Cuándo llamar a un técnico

If the error persists and the printer fails to register the tray, the internal paper sensor might be damaged beyond standard user repair.

Ficha técnica del equipo

  • Technology: Monochrome laser
  • Speed: 40 ppm
  • Paper capacity: 250 sheets
  • Supported weight: 60-90 g/m²
  • Compatible consumables: 50F series
  • Recommended maintenance: Roller cleaning twice a year
  • Drivers / official firmware

Steps to follow

  1. 1

    Access tray

    Open the input tray and remove all stacked paper.

  2. 2

    Clear jam

    Gently pull out any paper fragments remaining in the path.

  3. 3

    Check rollers

    Make sure the pickup rollers are free from dust and labels.

  4. 4

    Reset

    Close all doors and press the continue button.

Frequently asked questions

The error 200.01 signals a paper jam in the main input area or near the feed rollers.

Yes, always remove paper slowly to avoid snapping small pieces that could block internal sensors.

Using damp paper or heavy cardstock frequently causes these types of paper path errors.

Clean the rollers with a slightly damp cloth every 10,000 pages to ensure smooth paper grip.