1890PIXMA TS9520

Canon PIXMA TS9520 error 1890: Packing Material Removal

The Canon PIXMA TS9520 error 1890 is a setup notification indicating that protective shipping materials are still inside the unit. Many owners wonder why does my Canon PIXMA TS9520 show error 1890? The error exists as a safeguard to ensure the printer carriage isn't restrained, which could lead to mechanical stress if the protective tapes were not removed as instructed.

1 views

Common causes

  • 1Orange tape left on the carriage.
  • 2Protective foam in the ink bay.
  • 3Adhesive residue obstructing a sensor.
  • 4Shipping material wedged near the printhead.

Solutions

Diagnóstico rápido

If you see this immediately after unpacking, don't worry. It's a prompt to check for any missed orange tape or white foam blocks used for transit safety.

Solución paso a paso

  1. Power off the printer.
  2. Open the main scanner cover.
  3. Scan the interior for any orange plastic tape.
  4. Peel off all materials completely.
  5. Close and restart the device.

Prevención y mantenimiento

Ensure all packing components are gone during installation. Keeping the unit clean and free of unnecessary obstructions is best for longevity.

Cuándo llamar a un técnico

If the error doesn't disappear after clearing the unit, a sensor might be faulty. Contact Canon support for a warranty claim.

Ficha técnica del equipo

  • Technology: FINE inkjet.
  • Speed: 15 ipm (black).
  • Connectivity: Wi-Fi.
  • Capacity: 200 sheets.
  • Consumables: PGI-280 / CLI-281.
  • Use: Document & Photo.
  • Official support

Steps to follow

  1. 1

    Open access door

    Lift the scanner lid to check inside.

  2. 2

    Remove tape

    Check for orange adhesive strips or foam.

  3. 3

    Reset

    Close the lid and turn the power on.

Frequently asked questions

This error occurs because sensors detect tape or foam meant to hold the printer parts in place during shipping.

No, it's only meant to prevent movement during transit.

Yes, leftover tape or foam can block the carriage and burn out the motor.

Ensure all orange stickers are pulled and follow the on-screen configuration menu.