1890PIXMA TR8620a

Canon PIXMA TR8620a Error 1890: Quick Fix

Canon PIXMA TR8620a error 1890 occurs when the system detects that protective materials have not been removed after unboxing or a cartridge change. If you wonder why does my Canon PIXMA TR8620a show error 1890, check for leftover orange tape or cardboard blocks near the print carriage. This domestic multifunction device is highly efficient, but requires a clean setup to initiate its operations.

1 views

Common causes

  • 1Shipping Tape: Orange protective tape left on the carriage.
  • 2Packing Foam: Material stuck underneath the paper loading trays.
  • 3Sensor Interference: Obstructions blocking lid position sensors.
  • 4Ink Setup Error: Cartridges installed while plastic bottom film is still attached.

Solutions

Quick Diagnosis

Error 1890 is purely a setup-related notification. If you are a new user or recently replaced your ink, you likely missed a strip of shipping tape or foam protection.

Step-by-step Solution

  1. Open the Bay: Lift the main printer cover while it is on.
  2. Look for Tape: Inspect the carriage area for any orange tape or protective cardboard inserts.
  3. Clear the Obstacles: Carefully remove any material that isn't a permanent part of the machine.
  4. Reset: Close the cover; the printer should perform a startup routine and clear the error.

Prevention and Maintenance

Do not force the print carriage manually. When changing ink, take a moment to look at the inner tracks to ensure all packing foam has been cleared.

When to Call a Technician

If you have performed a thorough visual inspection and confirmed no material is left, a sensor malfunction is likely.

Equipment Technical Data

  • Technology: Inkjet (5 tanks)
  • Print Speed: 15 ipm (black)
  • Connectivity: Wi-Fi, Ethernet, USB
  • Input Capacity: 200 sheets (dual path)
  • Compatible Consumables: CLI-281 / PGI-280 series
  • Recommended Use: Home photography and documents
  • Official Drivers / firmware

Steps to follow

  1. 1

    Open Cover

    Lift the main cover to access the ink cartridge bay.

  2. 2

    Check for Tape

    Look for any remaining orange tape or cardboard protectors.

  3. 3

    Remove Materials

    Remove any protective elements and close the cover securely.

Frequently asked questions

This error means that protective shipping materials are still inside the printer.

Yes, they must be removed to avoid mechanical damage.

It uses the CLI-281 and PGI-280 ink series.

Always check all compartments thoroughly after replacing ink.