1890PIXMA G610

Fix Canon PIXMA G610 Error 1890: Packing Material

The 1890 error code on the Canon PIXMA G610 indicates that protective packing material or adhesive tape from the shipping process has not been fully removed. This physical obstruction prevents the print head carriage from moving freely. To resolve this, you must perform a thorough check of the interior of the printer to clear all remnants of the packaging.

1 views

Common causes

  • 1Unremoved orange security tape from the shipping process.
  • 2Protective foam fragments trapped along the carriage path.
  • 3Dislodged internal plastic spacer during the unboxing process.
  • 4Paper scraps mimicking a physical obstruction.

Solutions

Diagnóstico rápido

This error typically happens during initial setup. If your printer attempts to initialize but stops with a clunking noise or a warning alert, it is a clear sign that a physical lock is preventing the print head carriage from completing its routine.

Solución paso a paso

  1. Unplug the printer completely from the power source.
  2. Open the scanner unit and visually inspect the entire width of the print head carriage area.
  3. Scan for orange tape or white foam spacers that were used during transport.
  4. Remove any obstructions carefully and confirm that the carriage moves smoothly from side to side when pushed by hand.

Prevención y mantenimiento

When unboxing your printer, follow the provided manual explicitly regarding 'Start-Up' steps. Never force the carriage movement; if you encounter resistance, re-examine the area for hidden clips or small adhesive pieces.

Cuándo llamar a un técnico

If you have cleared all visible packing materials and the 1890 error still triggers, there may be a piece of debris lodged under the carriage rail. Avoid taking the casing apart yourself to prevent damaging fragile plastic components.

Ficha técnica del equipo

  • Technology: Photo Inkjet Printer
  • Speed: High-quality photo printing
  • Connectivity: Wi-Fi, High-Speed USB
  • Feeding Capacity: 100-sheet rear tray
  • Compatible Consumables: GI-13 Ink series (6-color set)
  • Recommended Use: Professional photography, high-quality projects
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Visual Check

    Open the printer cover and look for any remaining orange shipping tapes.

  2. 2

    Carriage Free-Test

    Ensure the print head carriage is not being held by any security clip.

  3. 3

    Check for Debris

    Verify no small foam or plastic shards are obstructing the rail.

  4. 4

    Power Initialization

    Plug the device back in and turn it on to allow it to recalibrate.

Frequently asked questions

Yes, it is common to overlook one of the many protective adhesive strips installed for safe transit.

Yes, the motor responsible for moving the carriage can overheat if it constantly attempts to move against a physical block.

Use authentic Canon GI-13 ink bottles to keep your warranty valid and ensure the best quality output.

Take your time during the unboxing phase and follow the official Canon quick-start guide to ensure all safety tabs are removed.

Fix Canon PIXMA G610 Error 1890: Packing Material | Vimazdev