1688pixma-ts5320

Canon PIXMA TS5320 error 1688: Ink empty detection

The Canon PIXMA TS5320 error 1688 triggers when the cartridge's internal ink counter reaches zero. This notification is a safety feature to prevent printhead damage. Users often ask why does my Canon PIXMA TS5320 show error 1688, and it is usually because the chip indicates a empty state.

1 views

Common causes

  • 1Internal cartridge ink count has reached zero.
  • 2Use of refilled cartridges that didn't properly reset the chip.
  • 3Dirty or damaged contacts between the cartridge and printhead.
  • 4Chip recognition error following intensive usage.

Solutions

Quick Diagnosis

The unit pauses printing and the indicator blinks. The LCD will display the code 1688 to inform you that a cartridge requires attention.

Step-by-step Solution

  1. Identify the empty cartridge via the control panel.
  2. Press and hold the 'Stop' button (triangle button) for at least 5 seconds.
  3. The printer will resume operation, ignoring the internal ink level sensor for that specific cartridge.

Prevention and Maintenance

Always source high-quality consumables. The FINE series (PG-260/CL-261) is specifically calibrated for this model's logic. Do not print when ink is extremely low to avoid hardware strain.

When to Call a Technician

Not required for this error. If the problem persists after replacement, gently wipe the golden contacts on the cartridge.

Device Technical Specs

  • Technology: Inkjet Multifunction
  • Compatible Consumable: FINE Series (PG-260, CL-261)
  • Connectivity: Wi-Fi, USB, Mobile App
  • Print Speed: 13 ipm (B&W)
  • Recommended Use: Home and School
  • Official drivers / firmware

Steps to follow

  1. 1

    Identify empty cartridge

    Check the panel to see which color is empty.

  2. 2

    Bypass the error

    Hold the Stop button (triangle) for 5 seconds.

  3. 3

    Resume printing

    The unit will bypass the sensor and finish current tasks.

Frequently asked questions

The system detects that the ink cartridge has reached its estimated empty point and asks for a replacement.

Yes, you can hold the Stop button for a few seconds to bypass the warning and finish your print job.

No, it is just a consumable warning. However, printing without ink can damage the printhead due to overheating.

It is recommended to use original PG-260/CL-261 cartridges to avoid ink count errors.

Canon PIXMA TS5320 error 1688: Ink empty detection | Vimazdev