1485MAXIFY GX2050

Error 1485 Canon MAXIFY GX2050: Ink System Failure

The Canon MAXIFY GX2050 error 1485 is a specific MegaTank alert indicating insufficient ink levels or an obstruction in ink flow to the print head. This error is critical to preventing permanent damage to print nozzles due to overheating. While the MegaTank system allows for easy refills, it requires the user to maintain consistent ink levels. This machine is built for high-volume environments requiring steady reliability.

1 views

Common causes

  • 1Critically low ink level in one or more tanks.
  • 2Air bubbles entering the ink conduits.
  • 3Clogged print head nozzle.
  • 4Dirty or failed ink level sensor due to previous spills.

Solutions

Quick Diagnosis

The 1485 error appears primarily when the sensor detects air bubbles in the ink tubing or when the actual ink level is too low for the system to pressurize the head correctly. Visually check levels at the front before starting any software-based cleaning.

Step-by-Step Solution

  1. Refill all tanks up to the max line using original Canon ink.
  2. Start the 'Head Cleaning' process from the printer control panel to force ink through the tubes.
  3. If the error persists, perform a 'Deep Cleaning' (be aware this consumes ink).
  4. Restart the unit and check if the error light turns off.

Prevention and Maintenance

Never allow the tanks to drop below 20% capacity to prevent air from entering the tubes. If the printer will be idle for a long time, print at least one test page weekly. Always use original inks to ensure the correct viscosity.

When to Call a Technician

If after several cleanings the error persists, the print head may have dried out permanently or have a faulty internal pressure sensor.

Technical Specifications

  • Technology: MegaTank Inkjet
  • Speed: 20 ppm
  • Connectivity: Wi-Fi, USB, Ethernet
  • Capacity: High load
  • Compatible Consumables: GI-2050 bottles
  • Usage: Corporate/Office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check Levels

    Open the ink tank cover and visually verify if any of the colors are below the marked minimum line.

  2. 2

    Refill Ink

    Refill the affected tank with original ink up to the maximum mark, avoiding spills.

  3. 3

    Deep Cleaning

    Access the maintenance menu and perform a 'deep cleaning' to purge any air from the system if the printer has been idle for a while.

Frequently asked questions

Error 1485 indicates the system detects insufficient ink levels or that ink flow is not reaching the print head consistently.

Yes, the MegaTank system is designed for user refills using original GI-2050 bottles that prevent air bubbles.

If you continue printing with low levels, the print head may overheat; stop printing immediately until refilled.

Only necessary if the printer has been off for months or if ink levels have been critical for an extended period.