Canon PIXMA TS5320 Error 1403: Cartridge Not Detected
The Canon PIXMA TS5320 error 1403 is a common fault related to ink cartridge recognition. If you wonder why does my Canon PIXMA TS5320 show error 1403, it is likely that the electrical contacts are dirty or the cartridge is misaligned. This home device is reliable, but needs occasional maintenance for optimal connectivity.
Common causes
- 1Dirty or oxidized metallic contacts on the cartridge.
- 2Cartridge incorrectly seated in the slot.
- 3Defective cartridge chip from the factory.
- 4Internal failure in the print head pins.
Solutions
Quick Diagnosis
Error 1403 displays when the system gets no response from the cartridge. Why does my Canon PIXMA TS5320 show error 1403? If you just changed your ink, it might be a simple contact error.Step-by-step solution
- Turn on the printer.
- Lift the scanner cover and wait for the carriage to move.
- Remove both cartridges and check for any adhesive residue on the contacts.
- Gently clean the chips with a lint-free dry cloth.
- Reinstall the cartridges and check if the error is cleared on the panel.
Prevention and maintenance
Avoid touching the metallic chips on new cartridges, as natural oils degrade connectivity. Keep the interior free of dust by cleaning it every 6 months. Using original Canon ink ensures longevity of the internal print head.When to call a technician
If cleaning contacts and using new cartridges fails, the internal print head may have shorted and will require professional repair.Technical specifications
- Technology: FINE inkjet
- Resolution: Up to 4800 x 1200 dpi
- Connectivity: Wi-Fi, Bluetooth
- Compatible consumable: PG-260 / CL-261 series
- Recommended use: Home office / Students
- Official drivers / firmware
Steps to follow
- 1
Remove cartridges
Open the lid and remove both ink cartridges.
- 2
Clean contacts
Wipe the gold chips on the cartridges with a clean, dry cloth.
- 3
Reinstall
Reinsert the cartridges until they click into place.
Frequently asked questions
This error means the printer is not receiving a signal from the cartridges, often due to dirty electrical pins.
Yes, you cannot print while this error is displayed as the printer cannot verify ink levels.
Always use original PG-260 and CL-261 cartridges for best results.
Avoid touching the gold chips to prevent static or oils from affecting connectivity.