1403PIXMA TS3522

Canon PIXMA TS3522 Error 1403: Easy Fix Guide

The 1403 error code on the Canon PIXMA TS3522 indicates that the print head or cartridges are not correctly installed or are experiencing a communication failure. This usually occurs after replacing ink cartridges or during a printer initialization. The primary solution is to remove, clean, and reseat the cartridges firmly.

1 views

Common causes

  • 1Dirty electrical contacts due to ink spray or dust accumulation.
  • 2Physical misalignment of the cartridge within the print head carriage.
  • 3Internal circuit failure within the cartridge chip.
  • 4Unexpected power interruption during the printer startup sequence.

Solutions

Diagnóstico rápido

The 1403 error is identified by a flashing alarm light on your PIXMA TS3522 control panel. If you recently replaced the ink tanks or noticed the carriage hitting an obstruction, the printer is failing to read the electrical chip on the cartridge correctly.

Solución paso a paso

  1. Power off the printer and unplug it from the wall for at least one minute.
  2. Open the front cover and carefully remove both black and color ink cartridges.
  3. Clean the metal contacts on both the cartridges and the print head inside the printer using a clean, dry, lint-free cloth.
  4. Reinsert the cartridges into their slots until you hear a secure click.
  5. Close the lid and turn the printer back on to see if the error is resolved.

Prevención y mantenimiento

Do not touch the gold electrical contacts with your fingers, as skin oils can cause conductivity issues. To maintain performance, ensure you print at least once every two weeks to prevent ink clogging, and always update your printer firmware via the Canon utility software.

Cuándo llamar a un técnico

If the 1403 error remains after cleaning the contacts and trying fresh cartridges, the internal print head assembly may have suffered an electrical fault. At this stage, professional service or a warranty claim is necessary.

Ficha técnica del equipo

  • Technology: FINE Inkjet
  • Speed: Approx. 7.7 ipm (black) / 4.0 ipm (color)
  • Connectivity: Wi-Fi, USB, Wireless Direct
  • Paper handling: Rear tray for 60 sheets
  • Compatible consumables: Canon PG-275 and CL-276 series (standard and XL)
  • Recommended use: Home and light office use
  • Official drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Turn off the printer and unplug the power cord.

  2. 2

    Removal

    Open the cartridge cover and pull out both ink tanks.

  3. 3

    Cleaning

    Wipe the gold contacts with a dry, lint-free cloth.

  4. 4

    Reseat

    Push cartridges back in until they click securely into place.

Frequently asked questions

If cleaning fails, replace the cartridges with new ones. If the issue remains, the print head may need service.

It is a common connection error. While not 'serious' in terms of permanent damage, it renders the printer unusable until fixed.

It uses the Canon PG-275 and CL-276 ink cartridge series.

Only run a cleaning cycle when you see streaks or missing colors in your prints to avoid unnecessary ink wastage.