1403PIXMA Pro-1000

Canon PIXMA Pro-1000 error 1403: Printhead Troubleshooting Guide

The Canon PIXMA Pro-1000 error 1403 is a common alert indicating a printhead communication failure. It typically occurs when the printer fails to register the printhead correctly due to residue or electrical interference. This guide outlines how to resolve this issue and keep your professional inkjet printer operational.

1 views

Common causes

  • 1Ink accumulation on the printhead contacts causing short circuits.
  • 2Oxidation of contact pins after long storage.
  • 3Internal electrical component failure on the printhead logic board.
  • 4Physical misalignment due to carriage obstruction.

Solutions

Diagnóstico rápido

The error 1403 shows up as an immediate halt in printing operations. If the unit struggles to initialize after a long period of inactivity, this printhead error is a likely culprit for the system freeze.

Solución paso a paso

  1. Power Cycle: Turn off the printer and unplug the power cord for 10 minutes to drain internal static.
  2. Printhead Removal: Open the front cover and gently remove the printhead as per the user manual.
  3. Contact Cleaning: Clean the gold electrical pins with a dry, lint-free cloth.
  4. Reinstallation: Reinsert the printhead ensuring it locks into place before restarting.

Prevención y mantenimiento

Keep the printer in a clean environment to prevent dust accumulation on the printhead contacts. Always use official PFI-1000 ink tanks. Frequent, small print jobs are better for the nozzles than long gaps between printing sessions.

Cuándo llamar a un técnico

If the error persists after cleaning the electrical contacts, the printhead assembly may have suffered a permanent electrical failure requiring professional replacement.

Ficha técnica del equipo

  • Technology: LUCIA PRO inkjet system
  • Print Speed: Approx. 4 min 10 sec per A2 photo
  • Connectivity: Wi-Fi, Ethernet, USB 2.0
  • Feeding Capacity: Multi-purpose rear tray
  • Compatible Consumables: PFI-1000 series (80ml)
  • Recommended Use: Professional photography, fine art
  • Drivers / official firmware

Steps to follow

  1. 1

    Power Cycle

    Turn off the printer and unplug the power cord for 10 minutes to drain internal static.

  2. 2

    Printhead Removal

    Open the front cover and gently remove the printhead as per the user manual.

  3. 3

    Contact Cleaning

    Clean the gold electrical pins with a dry, lint-free cloth.

  4. 4

    Reinstallation

    Reinsert the printhead ensuring it locks into place before restarting.

Frequently asked questions

This error occurs when there is a communication failure between the printer logic board and the printhead.

It is a significant error, but often manageable by cleaning electrical contacts or performing a reset.

Only use original PFI-1000 series ink tanks to ensure print quality and prevent nozzle clogging.

Regular use is the best maintenance; perform manual cleaning only if error messages appear or print quality degrades.