1403PIXMA G610

Fix Canon PIXMA G610 Error 1403: Troubleshooting Guide

The 1403 error code on a Canon PIXMA G610 signals that the print head is either improperly installed or faulty. This error halts all print operations due to communication issues between the print head and the carriage. The primary fix involves reseating the print heads to ensure stable electrical connectivity.

1 views

Common causes

  • 1Poor electrical contact between the print head and the carriage pins.
  • 2Physical wear of the print head integrated circuits.
  • 3Carriage mechanism misalignment resulting from previous paper jams.
  • 4Firmware communication failure during the startup sequence.

Solutions

Diagnóstico rápido

The 1403 error is identified by a blinking orange light and a 'Print head type is incorrect' error message on your screen. First, perform a hard power cycle to ensure it is not a temporary software glitch before opening the printer housing.

Solución paso a paso

  1. Power off the printer and unplug the power cord to prevent electrical damage.
  2. Open the scanner unit and carefully remove the print heads without touching the gold contacts.
  3. Clean the contacts on the print head and the carriage using a dry, lint-free cloth to remove any ink residue or dust.
  4. Reinstall the print heads, pressing them firmly until they click into place, then close the unit and power on.

Prevención y mantenimiento

Run the printer's 'Head Cleaning' utility once a month to prevent clogging. Keep the printer in a clean, dust-free environment and avoid moving the unit while it is powered on to prevent mechanical misalignment.

Cuándo llamar a un técnico

If the error persists after reseating the print heads, the carriage pins may be bent or the print head chip may be damaged. Contact professional support for a hardware diagnostic if the unit is still under warranty.

Ficha técnica del equipo

  • Technology: Inkjet Refillable MegaTank Printer
  • Speed: Up to 3.9 ipm (color)
  • Connectivity: Wi-Fi, High-Speed USB
  • Feeding Capacity: 100-sheet rear tray
  • Compatible Consumables: Canon BH-10 and CH-10 print heads; GI-13 ink series
  • Recommended Use: High-volume photo printing
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Safe Power Down

    Turn off the printer and disconnect it from power for 60 seconds.

  2. 2

    Carriage Access

    Open the scanner unit to access the print head carriage.

  3. 3

    Reseat Print Heads

    Remove and re-insert both print heads, ensuring locking clips are secure.

  4. 4

    System Reset

    Power on the unit and wait for the initialization light sequence.

Frequently asked questions

Yes, it is a critical hardware error. If simple reseating doesn't work, you may need a print head replacement.

Avoid forcing prints, as a shorted print head can potentially damage the main logic board.

Use only genuine Canon GI-13 series ink to ensure optimal print head health and warranty coverage.

Run the cleaning utility monthly or immediately if you notice horizontal streaks on your prints.

Fix Canon PIXMA G610 Error 1403: Troubleshooting Guide | Vimazdev