1403PIXMA G3270

Canon PIXMA G3270 error 1403: Troubleshooting Guide

The Canon PIXMA G3270 error 1403 is a critical alert indicating a communication fault between the printheads and the main logic board. This error often manifests after paper jams or improper maintenance. To fix this, you must clean the electrical contacts to resolve the Canon PIXMA G3270 error 1403 effectively.

1 views

Common causes

  • 1Dirty electrical pins on the printhead.
  • 2Incorrect installation of the printheads.
  • 3Electrical surge damage.
  • 4High humidity affecting sensor sensitivity.

Solutions

Quick Diagnosis

The 1403 error is signaled by a flashing alarm light. Confirm this is the issue by verifying no other paper errors are present. Why is my Canon G3270 showing error 1403? It is typically caused by ink buildup on the printhead pins.

Step-by-Step Solution

  1. Power Off: Switch off the printer and disconnect it.
  2. Open Cover: Lift the scanner unit to reveal the printhead carriage.
  3. Remove Printheads: Press the tabs to remove the printheads carefully.
  4. Clean Contacts: Use a dry, lint-free cloth to clean the gold contacts.
  5. Reinstall: Place the printheads back and close the unit.

Prevention and Maintenance

Handle printheads with care. Avoid touching contacts with fingers. Use only genuine ink to extend head lifespan.

When to Call a Technician

If the error persists after cleaning, the internal hardware may require professional repair.

Technical Specifications

  • Technology: MegaTank Inkjet
  • Speed: Up to 11 ipm mono
  • Connectivity: Wi-Fi, USB
  • Capacity: 100 sheet rear tray
  • Ink: GI-11 series
  • Usage: Home and Small Office
  • Drivers / Official Firmware

Steps to follow

  1. 1

    Power Off

    Turn off the printer and unplug the power cord to ensure safety.

  2. 2

    Access Printheads

    Open the printer cover to access the printhead carriage.

  3. 3

    Clean Contacts

    Gently wipe the gold electrical contacts with a lint-free cloth.

  4. 4

    Reinstall

    Securely reseat the printheads and restart the device.

Frequently asked questions

This error occurs when the printer fails to detect the printheads properly, often due to dirty contacts or improper installation.

It is a common hardware error that requires immediate attention; if cleaning fails, the printhead might need replacement.

The printer uses GI-11 series ink bottles for the integrated tank system.

Perform regular nozzle cleanings via software and keep the printer in a clean environment.